Tuesday, September 30, 2014

Big Plays by Big Players

Calgary-based Encana has agreed to acquire shale producer Athlon Energy for $5.93 billion. The deal gives the Canadian company a large land position in Texas' oil-rich Permian Basin and it shows how Encana’s has revised its vision away from natural gas and towards oil. Read more here.

Quick and accurate design with #SimSci, #TechValidate

Customer Evidence verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Monday, September 29, 2014

DYNSIM allows customers to check and optimize processes, #SimSci #TechValidate

Customer References verified by TechValidate.

About DYNSIM: DYNSIM is part of the Dynamic Simulation Suite from Invensys, assisting in process design, controls checkout, and control system design. This dynamic simulator helps plant management operate in a safe and profitable manner. Its operator training simulator provides safer operation while also improving performance and productivity. One example is using DYNSIM to evaluate flare and relief systems in a plant to raise the safety standard by making sure that the flares can handle the loads as they occur dynamically. DYNSIM is a cost-effective program, reducing the cost of process equipment.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Sunday, September 28, 2014

SimSci to design new equipment, #TechValidate

Customer Survey verified by TechValidate.

About the Process Engineering Suite: The Process Engineering Suite (PES) from Invensys is a suite of software tools used in engineering design and operational analysis. The Processing Engineering Suite contains five process design and optimization tools: DATACON, HEXTRAN, INPLANT, PRO/II, and VISUAL FLOW.
·         DATACON provides data reconciliation, turning real-time data into reliable information.
·         HEXTRAN provides design and rating of heat exchangers and heat exchanger networks.
·         INPLANT is a steady-state simulator that designs, rates, and analyzes plant piping systems like cooling water networks and steam distributions systems.
·         PRO/II is process simulation software that optimizes plant performance by improving process design, operational analysis, and performing engineering studies.
·         VISUAL FLOW is a fluid flow steady state simulator developed to design, rate, and analyze oil and gas flare networks.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Friday, September 26, 2014

PRO/II is this customer's main steady state simulator, #SimSci #TechValidate

Customer Survey verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Thursday, September 25, 2014

Reliance Industries Limited finds that #SimSci software’s heavy oil technology greatly exceeds expectations compared to the competition, #TechValidate

Customer Proof verified by TechValidate.

Technical Support: As always, feel free to reach out to your local technical support team for more information.

Wednesday, September 24, 2014

Bringing the BIG picture into focus!

If you're concerned with the big picture of asset development and utilization, SimSci offers an advanced, real-time performance-based software solution for complete asset modeling. Learn more here:

software.invensys.com/big

Download a free white paper “Creating a Competitive Advantage Through Integrated Upstream Asset Management” or schedule a private consultation with a SimSci expert.

Make adjustments on operational parameters during start up procedures with #SimSci, #TechValidate

Customer Survey verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Tuesday, September 23, 2014

From HydrocarbonProcessing.com: "Schneider Electric unveils unified supply chain management software"

By improving collaboration across the refinery, Spiral Suite software helps traders, planners and schedulers make reliable decisions, manage risks and ultimately increase profitability.
Keywords:
Schneider Electric is introducing a unified supply chain management solution for the hydrocarbonprocessing industry, the company announced on Monday.

Built on its Spiral Suite platform, the new offering closes the value gaps left by legacy tools, according to Schneider officials. By improving collaboration across the refinery, Spiral Suite software helps traders, planners and schedulers make reliable decisions, manage risks and ultimately increase profitability.read full article here

PRO/II predicts better performance while validating plant data compared to other software, #SimSci #TechValidate

Customer Testimonial verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Monday, September 22, 2014

It is not too late register for Orlando! Register today to see SimSci customers present on their success use of our software

I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida.



I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida. 

Here is a sample of the customer presentations at SimSci Sessions!
  • Shell’s MBM Progress and Plan
  • OTS and Training Methodology – A success story from Reficar
  • SRP Navajo Standardized Performance-Based Training and NERC Compliance Success Story 

Thermodynamic accuracy with #SimSci, #TechValidate

Customer Content verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Sunday, September 21, 2014

Maintain your plant and reduce cost with #SimSci, #TechValidate

Customer Evidence verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Friday, September 19, 2014

SimSci software for simulation and analysis of your plant, #TechValidate

Customer Evidence verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Thursday, September 18, 2014

Optimize recycle flow through your plant and save energy, #SimSci #TechValidate

Customer Content verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Wednesday, September 17, 2014

Optimize plant operation faster with #SimSci, #TechValidate

Customer Evidence verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Tuesday, September 16, 2014

See what this customer had to say about SimSci, #TechValidate

Customer References verified by TechValidate.

About DYNSIM: DYNSIM is part of the Dynamic Simulation Suite from Invensys, assisting in process design, controls checkout, and control system design. This dynamic simulator helps plant management operate in a safe and profitable manner. Its operator training simulator provides safer operation while also improving performance and productivity. One example is using DYNSIM to evaluate flare and relief systems in a plant to raise the safety standard by making sure that the flares can handle the loads as they occur dynamically. DYNSIM is a cost-effective program, reducing the cost of process equipment.

Technical Support: As always, feel free to reach out to your local technical support team for more information.

Monday, September 15, 2014

“Crude Assay characterization and petroleum refinery operation simulation is very accurate and close to actual results [with SimSci.]”, #TechValidate

Customer Survey verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Sunday, September 14, 2014

SimSci software provides customers with a common process simulation and a user friendly platform, #TechValidate

Customer Evidence verified by TechValidate.

Technical Support: As always, feel free to reach out to your local technical support team for more information.

Friday, September 12, 2014

Will you be in Orlando to see all SimSci customers present on the value they receive from SimSci software?

I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida.



I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida. 

Here is a sample of the customer presentations at SimSci Sessions!
  • Shell’s MBM Progress and Plan
  • OTS and Training Methodology – A success story from Reficar
  • SRP Navajo Standardized Performance-Based Training and NERC Compliance Success Story 
  • Amine hydrochlorides in refinery overheads: Solving corrosion problems through electrolyte process simulation by Prodip Kundu (OLI Systems Inc.)
  • Smart Engineering from Concept to Operations by Frank Joop & Paras Trivedi (Integraph)
  • Emergency vessels blow down simulations by Pierre Duchet-Suchaux (Total SA)
  • Simulation of an Instrument Air Distribution System using Pipephase; Simulation of multiphase purge lines from a Bioethanol complex using PIPEPHASE by Adriana Ardilla (INELECTRA S.A.C.A)
  • Shutdown Studies of a Combined Cycle using a Simulator with Eric Liese (National Energy Technology Laboratory) 
  • OTS-System for Flash Furnace Operator Training in Chuquicamata-CODELCO
  • APC Implementation International by Jeff Wagoner (International Paper)
  • The Benefits and Opportunities of Using Dynamic Simulation with control system upgrade projects, new facility construction, and operator training in the oil and gas industry

  • Technical Support Symposium presentations including:
    • New Features in PRO/II
    • DYNSIM 5.2 New Features
    • Simulation Thermodynamics: Best Practices

SimSci provides a reliable to optimize and design process systems, #TechValidate

Customer Survey verified by TechValidate.


From Yahoo Finance: A crude warning to the world? Perhaps not

"Crude oil rebounded from a multimonth low Thursday after the International Energy Agency cut its oil demand forecast for the third month in a row.
“The recent slowdown in demand growth is nothing short of remarkable,” the IEA said in its closely watched monthly oil market report. “While demand growth is still expected to gain momentum, the expected pace of recovery is now looking more subdued.”
In other words, the world is unexpectedly consuming less oil, and that could have big implications for the global economy.
But should investors worry?" Read the full article and see the video here

Thursday, September 11, 2014

Want a wise investment tip?

Shorter time to first oil and gas. Faster return on investment. Bigger reward.

Download a free white paper today: software.invensys.com/faster.

This customer would recommend #SimSci because of its thermodynamic models and accuracy of results, #TechValidate

Customer Survey verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Wednesday, September 10, 2014

PRO/II is heavily used in monitoring and optimizing the distillation in refineries, #SimSci #TechValidate

Customer Survey verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Tuesday, September 9, 2014

From Hydrocarbon Processing: "US condensate exports send ripple effects downstream"

"The US, which a decade ago was considered an aging has-been in oil and gas production, now leads the globe in production, and a growing bucket of these crudes is light and sweet."

This article is highly interesting on how a recent policy change in the US to export condensates is affecting the rest of the world. 

Our customers are confident in the design of new plants with #SimSci, #TechValidate

Customer References verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Monday, September 8, 2014

This customer has used #SimSci software for over 20 years, #TechValidate

Customer Testimonial verified by TechValidate.

About DYNSIM: DYNSIM is part of the Dynamic Simulation Suite from Invensys, assisting in process design, controls checkout, and control system design. This dynamic simulator helps plant management operate in a safe and profitable manner. Its operator training simulator provides safer operation while also improving performance and productivity. One example is using DYNSIM to evaluate flare and relief systems in a plant to raise the safety standard by making sure that the flares can handle the loads as they occur dynamically. DYNSIM is a cost-effective program, reducing the cost of process equipment.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Sunday, September 7, 2014

Accurate information from SimSci leaves our customers feeling secure, #TechValidate

Customer Testimonial verified by TechValidate.

About VISUAL FLOW: SimSci VISUAL FLOW is a fluid flow simulator that designs, rates, and analyzes oil and gas flare networks. This Invensys application provides safer design and operation for engineers while also providing a reduced capital and operating cost. VISUAL FLOW is DIERS compliant while also complying with Occupational Safety and Health Administration (OSHA), API 520, and Health Safety and Environment (HSE) regulatory requirements. This application is integrated with the SIM4ME Portal, creating a user-friendly environment based on an Excel interface.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Friday, September 5, 2014

It’s only the first out in a 9-inning game

Although Nova Scotia recently announced a high-volume fracking ban, the provincial Energy Minister was sure to note the prohibition is not permanent. More research and community consideration is required; if attitudes change, so may legislation. Think of it as the first out in a 9-inning game...

SimSci Technical Support rates 5/5 stars

Customer Proof verified by TechValidate.

Technical Support: As always, feel free to reach out to your local technical support team for more information.

SimSci Simulation & Training Solutions Drive Plant Productivity

Design better. Train smarter. 
Commission faster. Operate safer.
With SimSci Simulation & Training Solutions
 Learn more here with a free whitepaper: SimSci Simulation & Training: Drive Plant Productivity

Thursday, September 4, 2014

Give Me Some Water

The World Resources Institute recently published a report that exposes the effect the lack of water availability may have on shale and tight oil development. They found that almost 40% of shale resources are in areas that are either arid or under high to extremely high levels of water stress; including China, Algeria, Mexico, South Africa, Libya, Pakistan, Egypt, and India.

The availability of water may be the largest limiting factor in future shale development. The immediacy of addressing this problem cannot be understated. And no one is excluded from responsibility; it falls on regulators, industry, and communities to take steps starting today. What steps are your company or community taking to circumvent the inevitable?

Improve operator skills with DYNSIM, #SimSci #TechValidate

Customer Survey verified by TechValidate.

About DYNSIM: DYNSIM is part of the Dynamic Simulation Suite from Invensys, assisting in process design, controls checkout, and control system design. This dynamic simulator helps plant management operate in a safe and profitable manner. Its operator training simulator provides safer operation while also improving performance and productivity. One example is using DYNSIM to evaluate flare and relief systems in a plant to raise the safety standard by making sure that the flares can handle the loads as they occur dynamically. DYNSIM is a cost-effective program, reducing the cost of process equipment.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Wednesday, September 3, 2014

Early bird registration pricing for the Orlando for the Global Customer Conference ends this Friday, 5 September - REGISTER TODAY TO SAVE

I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida.



I would like to invite you to attend the Schneider Electric Software Global Customer Conference September 29-October 3, 2014 in Orlando, Florida. 

Here is a sample of the customer presentations at SimSci Sessions!
  • Shell’s MBM Progress and Plan
  • OTS and Training Methodology – A success story from Reficar
  • SRP Navajo Standardized Performance-Based Training and NERC Compliance Success Story 
  • Amine hydrochlorides in refinery overheads: Solving corrosion problems through electrolyte process simulation by Prodip Kundu (OLI Systems Inc.)
  • Smart Engineering from Concept to Operations by Frank Joop & Paras Trivedi (Integraph)
  • Emergency vessels blow down simulations by Pierre Duchet-Suchaux (Total SA)
  • Simulation of an Instrument Air Distribution System using Pipephase; Simulation of multiphase purge lines from a Bioethanol complex using PIPEPHASE by Adriana Ardilla (INELECTRA S.A.C.A)
  • Shutdown Studies of a Combined Cycle using a Simulator with Eric Liese (National Energy Technology Laboratory) 
  • OTS-System for Flash Furnace Operator Training in Chuquicamata-CODELCO
  • APC Implementation International by Jeff Wagoner (International Paper)
  • The Benefits and Opportunities of Using Dynamic Simulation with control system upgrade projects, new facility construction, and operator training in the oil and gas industry

  • Technical Support Symposium presentations including:
    • New Features in PRO/II
    • DYNSIM 5.2 New Features
    • Simulation Thermodynamics: Best Practices

SimSci design software improved profitability through process optimization, #TechValidate

Customer Testimonial verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Tuesday, September 2, 2014

As goes California so goes the country…

In 2013, the Bureau of Land Management of California commissioned an independent review of well stimulation technologies by the California Council on Science and Technology (CCST). It recently released its findings with 9 main conclusions which is summarized below from the report.

1. Well stimulation in California is different than in other states, primarily due to geology.

2. Future oil recovery using hydraulic fracturing is expanded in and near existing oil fields in the San Joaquin Basin by production practices similar to today’s.

3. The Energy Information Agency suggests a new class of very deep unconventional reservoirs in the source rocks themselves, especially in the Monterey Formation.

4. Current hydraulic fracturing operations in California require a fraction of statewide water use by comparison to other states; 130,000 - 210,000 gallons of water per well to 4 million gallons per well in the Eagle Ford Formation in Texas.

5. There are no publicly reported instances of potable water contamination from subsurface releases in California.

6. The toxicity of chemicals used in hydraulic fracturing fluids requires further review. Recently-enacted Senate Bill 4 now requires full disclosure.

7. Some chemicals used for hydraulic fracturing may become incorporated in the water that is produced along with the oil.

8. Currently-practiced well stimulation technologies do not result in a significant increase in seismic hazard.

9. The direct environmental impacts of well stimulation practice in California appear to be relatively limited.

CA Senate Bill 4 is directing three future studies by the CCST in geology and well stimulation treatments, generic and potential environmental impacts of well stimulation treatments, and case studies with selected evaluations of environmental and public health risk, all to be released in mid-2015.

It’ll be interesting to follow the development and conclusions of these scientific reports, as well as, the responses of state government through regulations. It may seem unnecessary to be concerned about these developments if operating in Texas or Pennsylvania reserves, but everyone knows as goes California, so goes the country. Steps taken here will lead to nationwide changes. Start the journey with SimSci.

Improve troubleshooting with regular optimization from #SimSci, #TechValidate

Customer Proof verified by TechValidate.

About PRO/II: PRO/II is the major product in the Process Engineering Suite (PES). This process simulation software optimizes plant performance by improving process design, operational analysis, and performing engineering studies. It is designed to perform rigorous heat and material balance calculations for a wide range of chemical processes. PRO/II allows users to evaluate the use of heat integration with case studies, rigorously evaluate process improvements with the help of a process flow diagram (PFD), or model crude distillation units. PRO/II offers a wide variety of thermodynamic models to virtually every industry and is incredibly cost effective, decreasing both capital and operating costs.
Technical Support: As always, feel free to reach out to your local technical support team for more information.

Monday, September 1, 2014

SimSci design software is used for all kinds of material balances, #TechValidate

Customer Evidence verified by TechValidate.

Technical Support: As always, feel free to reach out to your local technical support team for more information.